Plan 9
HPET: fed00000 8086a701 14 MHz
122 holes free
0x00026000 0x0008e000 425984
0x00090000 0x0009f000 61440
0x00100000 0x00110000 65536
0x005dd000 0x20000000 530722816
0x20200000 0x40000000 534773760
0x40200000 0x64af2000 613359616
1679409152 bytes free
cpu0: 2296MHz GenuineIntel P6 (AX 000206A7 CX 17BAE3BF DX BFEBFBFF)
LAPIC: fee00000 0xffffff00fee00000
ec: cmd 66, data 62
amlmapio: no address
amlmapio: mapping \_SB.PCI0.RP01.A1E0 failed
amlmapio: no address
amlmapio: mapping \_SB.PCI0.RP02.A1E0 failed
amlmapio: no address
amlmapio: mapping \_SB.PCI0.RP03.A1E0 failed
amlmapio: no address
amlmapio: mapping \_SB.PCI0.RP04.A1E0 failed
ELCR: 0000
cpu0: lapic clock at 100MHz
cpu2: 2296MHz GenuineIntel P6 (AX 000206A7 CX 17BAE3BF DX BFEBFBFF)
cpu1: 2296MHz GenuineIntel P6 (AX 000206A7 CX 17BAE3BF DX BFEBFBFF)
cpu3: 2296MHz GenuineIntel P6 (AX 000206A7 CX 17BAE3BF DX BFEBFBFF)
i8042: kbd init failed
#S/sdE: ahci: sata-II with 2 ports
pcienable PCI.0.27.0: pcr 0->2
#A0: hda mem a0900000 irq 0
#A0: waitup timeout for reg=4c, mask=2, set=2
#A0: waitup timeout for reg=5c, mask=2, set=2
#A0: codec #0, vendor 10134206, rev 00100302
#A0: codec #3, vendor 80862805, rev 00100000
uhci: 0x8086 0x1c2c: port 0x2120 size 0x20 irq 0
uhci: 0x8086 0x1c2e: port 0x2100 size 0x20 irq 0
uhci: 0x8086 0x1c2f: port 0x20e0 size 0x20 irq 0
uhci: 0x8086 0x1c27: port 0x20c0 size 0x20 irq 0
uhci: 0x8086 0x1c28: port 0x20a0 size 0x20 irq 0
uhci: 0x8086 0x1c29: port 0x2080 size 0x20 irq 0
usbehci: 0x8086 0x1c2d: port a0906c00 size 1024 irq 0
usbehci: 0x8086 0x1c26: port a0906800 size 1024 irq 0
3928M memory: 1607M kernel data, 2321M user, 2946M swap
sdE0: LLBA 625,142,448 sectors
  ST9320325ASG 0009APM1 5VEKPWBF [newdrive]
sdE1: LBA 0 sectors
  MATSHITADVD-R UJ-8A8 HA13 D0210213240B4TDNVQAP [newdrive]

/dev/sdE0: ST9320325ASG
/dev/sdE0/9fat dos
/dev/sdE0/appleboot
/dev/sdE0/data
/dev/sdE0/esp dos
/dev/sdE0/fs hjfs
/dev/sdE0/nvram
/dev/sdE0/plan9
/dev/sdE1: MATSHITADVD-R UJ-8A8 HA13
/dev/sdM0: MMC Host Controller
/dev/sdUc5ad2: 8.07
/dev/sdUc5ad2/data 9660
/dev/sdUc5ad2/esp dos
bootargs is (tcp, tls, il, local!device)[local!/dev/sdUc5ad2/data]
user[glenda]:

init: starting /bin/rc
nusb/serial: getdev: '/dev/usb/ep17.0/data' device or object already in use
cirno Apr 2 17:29:30 starting dns resolver on /net
vgasize is (text, 640x480x8, 1024x768x16, ...) [1024x768x16]
monitor is (vesa, xga, lcd, ...) [vesa]

division by zero
000821 00000000 00000000 00000000 00000000 00009000 00000000 00000000 00007bfa
0000 0000 0000 0000 csZoPdi 1040 f7 DIV BP
aux/vga: write /dev/realmode: division by zero
mouseport is (ps2, ps2intellimouse, 0, 1, 2) [ps2] i8042: aux init failed

i8042: aux init failed
i8042: aux init failed
i8042: aux init failed
i8042: 00 returned to the ea command (pc=0xffffffff80140d13)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f5 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the e8 command (pc=0xffffffff80140dc0)
i8042: 00 returned to the 03 command (pc=0xffffffff80140dc9)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)
i8042: 00 returned to the f4 command (pc=0xffffffff80140ed2)